The most commonly used stainless steel in what areas?
Author： Date：2016-09-21 From： Hits：1628
Most of the use of the demand is to maintain the original appearance of the building. In determining the selection of stainless steel house type, the primary consideration is finishing the principles of corrosive aesthetic standards and needs of the location and the selection of the atmosphere.
However, other uses are constantly increasing to seek only the integrity or water permeability of the structure. For example, the roof and side walls of an industrial building. In these uses, the owner of the creation of the cost can be more important than the aesthetic, the appearance is not very clean can also be. The use of 304 stainless steel in a dry indoor environment is quite good.
However, in the countryside and the city to maintain its appearance in the field, it is necessary to carry out cleaning. In the industrial areas and coastal areas of severe pollution, the appearance will be very dirty, and even the occurrence of corrosion. But to obtain the aesthetic effect in the field environment, it is necessary to use nickel containing stainless steel. Therefore, 304 stainless steel is widely used in curtain wall, side wall, roof and other building use, but in the severe erosion of the industrial or marine atmosphere, the best choice of 316 stainless steel. There are several principles of planning, including the 304 and 316 stainless steel.
Due to the "dual phase" stainless steel 2205 has outstanding resistance to atmospheric corrosion resistance and high tensile strength and the elastic limit of the strength of the integration, so that the European principles also include this steel. The shape of the product, in fact, stainless steel is produced by the full specification of metal shape and scale, and there are many special shapes.
The most commonly used products are made of sheet and strip, and also used in the production of special commodities, for example, the production of hot rolled structural steel and extruded structural steel. And there are round, oval, square, rectangular and six angle type of welded pipe or seamless steel pipe and other products, including profiles, bars, wire and castings. In order to satisfy the needs of architects' aesthetics, a variety of different commercial appearance processes have been developed.